| |
|
  |
Magnetic plugs |
GN 738 GN 738.1 |
| d1 | d2 | d3 | e ~ | l1 | l2 | l3 | s | |
| 22 | G 3/8 | M 16x1,5 | 6 | 20,8 | 8 | 23 | 30,5 | 18 |
| 26 | G 1/2 | M 20x1,5 | 6 | 24,3 | 8,5 | 23,5 | 31 | 21 |
| 32 | G 3/4 | M 26x1,5 | 6 | 31,3 | 9 | 24 | 32 | 27 |
| Specification | Information | How to order |
| Aluminium matt shot-blasted
Magnet
GN 738
GN 738.1 |
Magnetic plugs GN 738 / GN 738.1 attract iron particles which might be suspended in the liquid. The magnetic pin is of a length which makes it impossible to de-magnetise itself. To avoid breakage or de-magnetising, round rod magnets are fitted with a plastic distance and protection tube. This latter tube has to be removed prior to installing the plug. The seal is retained in a radial undercut in the mating face which prevents it from dropping off and at the same time it cannot extrude under pressure. For this reason the seal can be of a relatively soft material which will give better sealing. |
Magnetic plug GN 738-22-G3/8
Code No. 738
Code No. 738.1 |
|
|
|